Page en cours de chargement


Contrôleurs HABA - HABA-KNX-LITE-EXX

HABA-KNX-LITE-E01
 
HABA-KNX-LITE-E01-TOP-0-25.jpg
 
 
Specification
Processor
ARM 926EJ-S @ 400MHz
Memory
128MBytes SDRAM
256 MBytes NAND Flash
16Mbit SPI Serial Flash (Microchip SST25VF016B)
Storage
1x Micro-SD (SPI)
RTC
1x battery backed I2C RTC (Micro Crystal RV-3029-C02)
USB
1x USB 2.0 Device Full-Speed 12 Mbits/s (Front Panel)
1x USB 2.0 Host Full-Speed 12 Mbits/s (Front Panel)
1x USB 2.0 Host Full-Speed 12 Mbits/s
LAN
1x 10/100 Ethernet +2K I2C Serial EEPROM with EUI-48 Node Identity (Microchip 24AA025E48)
KNX
1x Opto-isolated KNX/TP1 (Siemens TP-UART + Atmel ATmega128L pre-programmed with Weinzierl Engineering KNX / TP1 Certify Stack)
Setup / Debug
1x JTAG (internal)
1x Console via DBGU UART (internal)
Expansion
1x 50 pins connector for one optional RF Daughterboard (ENOCEAN, KNX/RF, MBUS, ZIGBEE...)
User Interface
1x Power LED (front panel)
1x Learning Mode Push Button and LED (Front Panel)
1x Link / Activity LED (Front Panel)
1x 10/100 LED (Front Panel)
1x Reset Push Button (internal)
1x User Push Button (internal)
1x User LED (internal)
Bootloader / OS
U-Boot or Barebox / Linux
Developpement Tools
Buildroot
Mechanical and environnemental
Size
DIN Rail Enclosure, 6 Modules, 105 x 86 x 58,5mm
Power supply voltage
+9Vdc to +36Vdc +/-5%, internal opto-isolated / 1.5kVdc DC/DC converter (Traco)
Power requirement
8W Max
Temperature
-20°C to +70°C standard (operating), -40°C to +85°C (storage)
Humidity
5% to 95% relative humidity, non condensing
Weight
TBD
Ordering Information
HABA-KNX-LITE-E01 / 955-00004-A01
256MBytes NAND Flash, 128MBytes SDRAM, No RF
 

Date de création : 18/05/2012 @ 10:34
Dernière modification : 10/10/2012 @ 11:01
Catégorie : Contrôleurs HABA

Imprimer l'article Imprimer l'article


^ Haut ^