Page en cours de chargement


Contrôleurs HABA - HABA-KNX-EXPLORER-CXX
rss Ces articles sont disponibles en format standard RSS pour publication sur votre site web:
http://www.calao-systems.com/data/artfr.xml
HABA-KNX-EXPLORER-C01
 
HABA-KNX-EXPLORER-C01-TOP-0-25.jpg
 
Specification
Processor
ARM 926EJ-S @ 400MHz
Memory
128MBytes SDRAM
256 MBytes NAND Flash
Storage
1x Micro-SD (SPI)
RTC
1x battery backed I2C RTC (Micro Crystal RV-3029-C02)
USB
1x USB 2.0 Device Full-Speed 12 Mbits/s (Front Panel)
1x USB 2.0 Host Full-Speed 12 Mbits/s (Front Panel)
1x USB 2.0 Host Full-Speed 12 Mbits/s
LAN
2x 10/100 Ethernet (SMSC LAN9303)
KNX
1x Opto-isolated KNX/TP1 (Siemens TP-UART + Atmel ATmega128L pre-programmed with Weinzierl Engineering KNX / TP1 Certify Stack)
Serial Interfaces
1x I2C (not isolated, only for external sensors, Temperature and Humidity for example)
1x Opto-isolated / 2.5kVrms RS232 (Linear Technology LTM2882CY-5)
2x Opto-isolated / 2.5kVrms RS485 (Linear Technology LTM2881CY-5), integrated selectable 120Ohms termination
Other Interfaces
4x Opto-isolated / 2.5kVrms Inputs (Analog Devices ADuM5404)
Setup / Debug
1x JTAG (internal)
1x Console via DBGU UART (internal)
Expansion
1x 50 pins connector for one optional RF Daughterboard (ENOCEAN, KNX/RF, MBUS, ZIGBEE...)
User Interface
1x Power LED (front panel)
1x Learning Mode Push Button and LED (Front Panel)
2x Link / Activity LED (Front Panel)
2x 10/100 LED (Front Panel)
4x Dry Contacts LED (Front Panel)
1x RS-232 Activity LED (Front Panel)
2x RS-485 Activity LED (Front Panel)
2x RS-485 120Ohms Termination Switch
1x Reset Push Button (internal)
Bootloader / OS
U-Boot or Barebox / Linux
Developpement Tools
Buildroot
Mechanical and environnemental
Size
DIN Rail Enclosure, 9 Modules, 157 x 86 x 58,5mm
Power supply voltage
+9Vdc to +36Vdc +/-5%, internal Opto-isolated / 1.5kVdc DC/DC converter (Traco THD 12-2411WI )
Power requirement
12W Max
Temperature
0°C to +70°C standard (operating), -40°C to +85°C (storage)
Humidity
5% to 95% relative humidity, non condensing
Weight
250grs
Ordering Information
HABA-KNX-EXPLORER-C01 / 955-00001-A01
256MBytes NAND Flash, 128MBytes SDRAM, No RF

HABA-KNX-EXPLORER-C01-TOP-0-25.jpg

HABA-KNX-EXPLORER-C01-TOP-45-25.jpg

HABA-KNX-EXPLORER-C01-FRONT-0-25.jpg

HABA-KNX-EXPLORER-C01-REAR-0-25.jpg

Date de création : 14/02/2010 @ 19:50
Dernière modification : 10/10/2012 @ 17:20
Catégorie : Contrôleurs HABA

Imprimer l'article Imprimer l'article


^ Haut ^