Page loading


Embedded Computers - TNY-A9G20-LPW-IXX

TNY-A9G20-LPW-I02

TNY-A9G20-LPW-I02-TOP-0-25.jpg     TNY-A9G20-LPW-I02-BOT-0-25.jpg

 
Specification (more informations --> See Repository & Wiki)
Processor
ATMEL AT91SAM9G20 @ 400MHz, Vcore = 1V0 (Block diagram)
Memory
256Mbytes NAND Flash, 8 bit wide, Vmem = 1V8
64Mbytes SDRAM, 32 bit wide, Vmem = 1V8
Storage
Micro-SD (SPI)
RTC
1x Micro-Crystal RV-3029-C2 (I2C) with external battery backup
USB
1x USB device (FS, 12Mbits/s)
Setup / Debug
1x JTAG
1x Console via UART DBGU (TTL)
Expansion
1x 50 pins connector / Top Side (I2C, SPI, USART, SSC, MCI, ISI, TC)
1x 60 pins connector / Bottom Side (USB host, Ethernet RMII, I2C, SPI, USART)
User interface
1x Power LED
1x Reset Push Button
Bootloader / OS
U-Boot or Barebox / Linux
Development tools
Buildroot
Mechanical and environnemental
Board size
41 x 36 mm
Power supply voltage
+5V +/-5% from power connector or USB device port (Vcore = 1V0, Vmem = 1V8 & Vio = 1V8 or 3V3)
Power requirement
100mA Max / Ultra Low Power mode (Shutdown / Wakeup)
Temperature
-40C to +85C standard (operating), -55C to +125C (Storage)
Humidity
5% to 95% relative humidity, non condensing
Weight
8grs
Ordering information
TNY-A9G20-LPW-I02 / 905-00018-B01
256Mbytes NAND, 64Mbytes SDRAM, Full Option, -40C to +85C
 
 

Creation date : 20/07/2009 @ 14:33
Last update : 15/02/2013 @ 11:35
Category : Embedded Computers

Print the article Print the article


^ Top ^