Page loading


Embedded Computers - USB-A9263-CXX

USB-A9263-C02
 
USB-A9263-C02-TOP-0-25.jpg
 
Specification (more informations --> See Repository & Wiki)
Processor
ATMEL AT91SAM9263 @ 200MHz, Vcore = 1V8 (Block diagram)
Memory
256Mbytes NAND flash, 8 Bit wide, Vmem = 3V3
64Mbytes SDRAM, 32 Bit wide, Vmem = 3V3
64Kbits serial SPI EEPROM, Vmem = 3V3
USB A plug connector
----> to FTDI FT2232D (1x USB 2.0 downstream port, full speed, 12Mbits/s), Power + JTAG + UART DBGU)
USB Stacked A connector
<---- from AT91SAM9263 (2x USB 2.0 host port, full speed, 12Mbits/s,), Power 100 mA max / port
USB Mini B connector
----> to AT91SAM9263 (1x USB 2.0 device port, full speed, 12Mbits/s)
LAN
1x Phy Ethernet 10/100 (National Semiconductor DP83848C)
Setup / Debug
1x JTAG, 1x UART DBGU over USB (FTDI FT2232D)
Expansion
1x 50 pins connector (I2C,Audio, Video )
User Interface
1x Power LED
1x Reset Push Button
1x User Push Button
1x User LED
Bootloader / OS
U-Boot or Barebox / Linux
Development Tools
Buildroot
Mechanical and environnemental
Board size
85 x 36 mm
Power supply voltage
+5V +/-5% via USB port
Power requirement
2.5W max (300mA Core , 200mA available for USB Host Ports + Expansion connector)
Temperature
0 to 70C standard (operating), -40 to 85C (storage)
Humidity
5% to 95% relative humidity, non condensing
Weight
30 grs
Ordering Information
USB-A9263-C02 / 905-00003-B01
256Mbytes NAND, 64Mbytes SDRAM, 64Kbits EEPROM, Full Option, 0 to 70C
USB-A9263-C11 / 905-00003-B11
256Mbytes NAND, 128Mbytes SDRAM, 64Kbits EEPROM, Full Option, 0 to 70C


 

Creation date : 29/06/2009 @ 15:32
Last update : 15/02/2013 @ 11:35
Category : Embedded Computers

Print the article Print the article


^ Top ^